Figure 144: Ac Plug Types; Table 103: Ac Power Cord Specifications For A Qfx3100 Director Device - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation

Table 103: AC Power Cord Specifications for a QFX3100 Director Device

Country or Region
Australia
China
Europe (except Italy, Switzerland,
and United Kingdom)
Italy
Japan
Korea
North America
Switzerland
United Kingdom
Related
Documentation
278
CAUTION: The supplied AC power cord for the switches is intended for use
with the QFX3100 Director device only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the QFX3100 Director
device are in compliance.
Table 103 on page 278 lists AC power cord specifications provided for each country or
region.
Electrical Specifications
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 12 A, 50 Hz or 60 Hz
250 VAC, 10A, 50 Hz
125 VAC, 13 A, 60 Hz
250 VAC, 10A, 50 Hz
250 VAC, 10 A, 50 Hz
Figure 144 on page 278 illustrates the plug on the power cord for some of the countries or
regions listed in Table 103 on page

Figure 144: AC Plug Types

AC Power Supply in a QFX3100 Director Device on page 34
Plug Standards
AS/NZ 3112-1993
GB2099.1 1996 and GB1002 1996
(CH1-10P)
CEE (7) VII
CEI 23-16/VII
JIS 8303
CEE 7/4
NEMA 5-15
SEV 1011 SEV 6534/2
BS 1363A
278.
Copyright © 2018, Juniper Networks, Inc.