Juniper QFabric QFX3000-G Hardware Documentation page 430

QFX3000-G QFabric System Hardware Documentation
Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet
380
You can mount a QFX3100 Director device on two posts of a 19-in. rack or cabinet by
using the mounting brackets provided with the device. (The remainder of this topic uses
"rack" to mean "rack or cabinet.")
You can mount the QFX3100 Director device on four posts of a four-post rack by using
the side rail brackets provided with the device. See
on Four Posts in a Rack or Cabinet" on page
Before mounting the device on two posts in a rack:
Verify that the site meets the requirements described in
for a QFX3100 Director Device" on page
Place the rack in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read "General Safety Guidelines and Warnings" on page
Remove the device from the shipping carton (see
Device" on page 378).
Ensure that you have the following parts and tools available:
Electrostatic discharge (ESD) grounding strap (provided)
Phillips (+) screwdriver, number 2
Four mid-mount mounting brackets and mounting screws (provided)
Screws to secure the chassis to the rack (not provided)
NOTE: One person must be available to lift the QFX3100 Director device
while another secures it to the rack.
CAUTION: If you are mounting multiple units on the rack, mount the heaviest
unit at the bottom and mount the others from bottom to top in order of
decreasing weight.
To mount the QFX3100 Director device on two posts in a rack:
Place the QFX3100 Director device on a flat, stable surface.
1.
Align one mid-mount bracket to the mid-mount bracket holes near the center of the
2.
side of the QFX3100 Director device. Ensure that the bracket is aligned with the
mounting holes and that the bracket face is facing the rack post.
Attach the mounting bracket to the QFX3100 Director device.
3.
"Mounting a QFX3100 Director Device
381.
"Site Preparation Checklist
208.
329.
"Unpacking a QFX3100 Director
Copyright © 2018, Juniper Networks, Inc.