Juniper QFabric QFX3000-G Hardware Documentation page 440

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
Unpacking a QFX3008-I Interconnect Device
390
Hardware on Four-Post Racks or Cabinets" on page 394
Interconnect Device Mounting Hardware on Two-Post Racks" on page
Mount the device by following the instructions in
3.
Device on a Rack or Cabinet Using a Mechanical Lift" on page
Connect the QFX3008-I Interconnect device to earth ground.
4.
See "Connecting Earth Ground to a QFX3008-I Interconnect Device" on page
Connect power to the device.
5.
See "Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase
Wiring Trays" on page 411,
with Three-Phase Delta Wiring Trays" on page
QFX3008-I Interconnect Device with Three-Phase Wye Wiring Trays" on page
(Optional) Install the cable management system or lockable front doors, by following
6.
the instructions in "Installing the Cable Management System on a QFX3008-I
Interconnect Device" on page 429
QFX3008-I Interconnect Device" on page
See "QFX3000-G QFabric System Installation Overview" on page 373
7.
about the next steps to install and configure your QFX3000 QFabric system.
Rack Requirements for a QFX3008-I Interconnect Device on page 231
Cabinet Requirements for a QFX3008-I Interconnect Device on page 239
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3008-I
Interconnect Device on page 246
Chassis Lifting Guidelines for a QFX3008-I Interconnect Device on page 338
After you prepare the installation site as described in
QFX3008-I Interconnect Device" on page
NOTE: The device is maximally protected inside the shipping box. Do not
unpack it until you are ready to begin installation.
Before you begin, ensure that you have the following parts and tools available to unpack
the QFX3008-I Interconnect Device:
Phillips (+) screwdriver, number 2
"Mounting a QFX3008-I Interconnect
"Connecting AC Power to a QFX3008-I Interconnect Device
418, and
and "Installing the Lockable Front Doors on a
430.
"Site Preparation Checklist for a
210, you may unpack the device.
or "Installing QFX3008-I
401.
405.
"Connecting AC Power to a
for information
Copyright © 2018, Juniper Networks, Inc.
409.
422.