Juniper QFabric QFX3000-G Hardware Documentation page 818

QFX3000-G QFabric System Hardware Documentation
Table 193: LCD Panel Menu Options in EX4300 Switches (continued)
Menu Label Description
STATUS In the Status menu, press Menu to cycle through the following information:
VCPs status: Up or Down
Display the status of VCPs on the switch. This option is supported only on EX4300 switches in a Virtual
Chassis configuration. This option is not supported on standalone EX4300 switches.
Power supply status: OK, Failed, or Absent
Fan status and Temperature status.
Fan status: OK, Failed, or Absent
Temp status: OK, High, or Shutdown
Junos OS version for EX Series switches loaded on the switches.
EXIT STAT MENU?
Choose one of the following:
Press Enter to exit the Status menu and go to the Maintenance menu.
Press Menu to display the VCPs status again.
You can disable the Status menu or the options in the Status menu in the LCD panel. See Configuring the
LCD Panel on EX Series Switches (CLI Procedure).
768 Copyright © 2018, Juniper Networks, Inc.