Device - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
456
You can also mount the device on four posts of a four-post rack by using the mounting
brackets provided with the device. See
Four Posts in a Rack or Cabinet" on page
The holes in the mounting brackets are placed at 1 U (1.75 in., or 4.45 cm.) apart so that
the device can be mounted in any rack that provides holes spaced at that distance.
Before mounting a QFX3600 or QFX3600-I device on two posts in a rack:
Ensure you understand how to prevent electrostatic discharge (ESD) damage. See
"Prevention of Electrostatic Discharge Damage" on page
Verify that the site meets the requirements described in
for a QFX3600 or QFX3600-I Device" on page
Place the rack in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines for a QFX3600 or QFX3600-I Device" on page
Remove the device from the shipping carton (see
Device" on page 454).
Ensure that you have the following parts and tools available:
ESD grounding strap (provided)
One pair of mounting brackets depending on how you want to mount the device
(provided)
Use the front/rear mounting brackets (part number 540-038579) to front-mount
or rear-mount the device.
Use the mid-mounting brackets (part number 540-038665) to mid-mount the

device.

6 Phillips 4x6-mm pan-head mounting screws (provided)
Four screws to secure the chassis to the rack (not provided)
Appropriate screwdriver for the mounting screws (not provided)
NOTE: One person must be available to lift the device while another secures
the device to the rack.
CAUTION: If you are mounting multiple device on a rack, mount a device in
the bottom of the rack first and proceed to mount the rest of the devices
from bottom to top.
"Mounting a QFX3600 or QFX3600-I Device on
458.
360.
"Site Preparation Checklist
212.
329, with particular attention
"Unpacking a QFX3600 or QFX3600-I
Copyright © 2018, Juniper Networks, Inc.
340.