Juniper QFabric QFX3000-G Hardware Documentation page 918

QFX3000-G QFabric System Hardware Documentation
Listing the Chassis and Component Details with the CLI
Related
Documentation
Locating the Serial Number on a QFX5100 Device or Component
Listing the Chassis and Component Details Using the CLI
868
NOTE: If you want to find the serial number on the physical device component,
you will need to remove the component from the device chassis, for which
you must have the required parts and tools available.
Listing the Chassis and Component Details with the CLI on page 868
1.
To list the QFX3008-I Interconnect device and components and their serial numbers,
use the
show fabric administration inventory interconnect-devices device-name
command.
For information about the
command, see show fabric administration inventory interconnect-devices.
Returning a QFX3008-I Interconnect Device or Component for Repair or Replacement
on page 862
If you are returning a switch or component to Juniper Networks for repair or replacement,
you must locate the serial number of the switch or component. You must provide the
serial number to the Juniper Networks Technical Assistance Center (JTAC) when you
contact them to obtain a Return Materials Authorization (RMA). See
Support to Obtain a Return Materials Authorization for a QFX Series Device or Component"
on page 895.
If the switch is operational and you can access the command-line interface (CLI), you
can list serial numbers for the switch and for some components with a CLI command. If
you do not have access to the CLI or if the serial number for the component does not
appear in the command output, you can locate the serial number ID label on the switch
or component.
NOTE: If you want to find the serial number ID label on a component, you
need to remove the component from the switch chassis, for which you must
have the required parts and tools available.
Listing the Chassis and Component Details Using the CLI on page 868
Locating the Chassis Serial Number ID Label on a QFX5100 Switch on page 869
Locating the Serial Number ID Labels on FRU Components on page 870
To list the QFX5100 switch and components and their serial numbers, use the
CLI operational mode command. If you are using the QFX5100 switch
chassis hardware
show fabric administration inventory interconnect-devices
CLI
"Contacting Customer
show
Copyright © 2018, Juniper Networks, Inc.