Qfx10002 Chassis Status Leds - Juniper QFX10002 Hardware Manual

Table 14: RJ-45 Management Port LEDs on a QFX10002 Switch
LED Color
Link/Activity Unlit
Yellow
Status Unlit
Green
Table 15: SFP Management Port LEDs on a QFX10002 Switch
LED Color
Link/Activity Unlit
Green
Green

QFX10002 Chassis Status LEDs

The QFX10002 has four status LEDs on the port side of the chassis, next to the access ports (see
24 on page 41).
State Description
Off No link is established, there is a fault, or the link is down.
Blinking or flickering A link is established, and there is link activity.
Off Either the port speed is 10 M or the link is down.
On steadily The port speed is 1000 M.
State Description
Off No link is established or the link is down.
On steadily Link is up and there is no activity.
Blinking A link is established, and there is link activity.
40
Figure