Table 220: Lcd Panel Menu Options - Juniper QFabric QFX3000-G Hardware Documentation

LCD Panel Menus

Table 220: LCD Panel Menu Options

Menu Description
IDLE In the Idle menu:
Press
Enter
SPD (speed)
ADM (administrative status)
DPX (duplex)
POE (Power over Ethernet)
See Network Port LEDs in EX3200 Switches or
information about the Status LED modes.
Press
Menu
Copyright © 2018, Juniper Networks, Inc.
Factory default
System EZSetup
The LCD panel has three menus: Idle, Status, and Maintenance. Toggle between the LCD
panel menus by pressing the
the button.
Enter
Table 220 on page 803 describes the LCD panel menu options.
to cycle through the Status LED modes:
to exit the Idle menu and go to the Status menu.
Chapter 55: Viewing EX4200 System Information
button. Navigate through the menu options by pressing
Menu
"Network Port LEDs in EX4200 Switches" on page 808 for
803