Juniper QFabric QFX3000-G Hardware Documentation page 888

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
838
NOTE: The password is the root password for the device. If you logged in
to the device as root, you do not need to perform this step.
Enter the following command on the device:
5.
root@device% dd if=/var/tmp/filename of=/dev/da1 bs=1m
The device writes the installation media image to the USB device:
root@device% dd if=install-media-qfx-5e-15.1X53-D30.5-domestic.img of=/dev/da0
bs=1m
1399+0 records in
1399+0 records out
1466957824 bytes transferred in 394.081902 secs (3722469 bytes/sec)
Log out of the shell:
6.
root@device% exit
% exit
user@device>
USB Port Specifications for the QFX Series on page 257
Performing a Recovery Installation on page 839
Performing a Recovery Installation Using an Emergency Boot Device
Copyright © 2018, Juniper Networks, Inc.