Juniper QFabric QFX3000-G Hardware Documentation page 933

Packing QFX3100 Director Device Components for Shipping
Related
Documentation
Packing a QFX3008-I Interconnect Device or Component for Shipping
Copyright © 2018, Juniper Networks, Inc.
Close the top of the cardboard shipping box and seal it with packing tape.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
12.
CAUTION: Do not stack device components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX3100 Director device components:
Place individual FRUs in antistatic bags.
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
Close the top of the cardboard shipping box and seal it with packing tape.
Write the RMA number on the exterior of the box to ensure proper tracking.
Returning a QFX3100 Director Device or Component for Repair or Replacement on
page 862
If you are returning a QFX3008-I Interconnect device or component to Juniper Networks
for repair or replacement, pack the item as described in this topic.
Before you begin packing a QFX3008-I Interconnect device or component, ensure that
you have:
Taken the necessary precautions to prevent ESD damage (see
Electrostatic Discharge Damage" on page
Retrieved the original shipping carton and packing materials. Contact your Juniper
Networks Technical Assistance Center (JTAC) representative if you do not have these
materials, to learn about approved packing materials. See
Support to Obtain a Return Materials Authorization for a QFX Series Device or
Component" on page 895.
Ensure that you have the following parts and tools available:
Antistatic bag, one for each component
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 2
Packing a QFX3008-I Interconnect Device for Shipping on page 884
1.
Packing QFX3008-I Interconnect Device Components for Shipping on page 885
2.
Chapter 58: Returning Hardware
"Prevention of
360).
"Contacting Customer
883