Replacing Qfx3100 Components - Juniper QFabric QFX3000-G Hardware Documentation

CHAPTER 40

Replacing QFX3100 Components

Installing and Removing QFX3100 Director Device Hardware Components
Copyright © 2018, Juniper Networks, Inc.
Installing and Removing QFX3100 Director Device Hardware Components on page 587
Removing a Power Supply from a QFX3100 Director Device (includes video) on page 588
Installing a Power Supply in a QFX3100 Director Device (includes video) on page 589
Removing a Fan Module from a QFX3100 Director Device on page 590
Installing a Fan Module in a QFX3100 Director Device on page 592
Removing a Network Module from a QFX3100 Director Device on page 593
Installing a Network Module in a QFX3100 Director Device on page 596
Removing an HDD Module from a QFX3100 Director Device on page 599
Installing an HDD Module in a QFX3100 Director Device on page 601
The field-replaceable units (FRUs) in a QFX3100 Director device are:
Power supply
Fan modules
Hard disk drive (HDD) modules
Network modules
The AC power supply and fan modules are hot-removable and hot-swappable. You can
remove and replace them without powering off the Director device or disrupting device
functions.
HDD modules are hot-removable and hot-swappable. You can remove and replace them
without powering off the Director device or disrupting device functions. Do not remove
both HDD modules at the same time, however.
The network module is not hot-removable or hot-swappable. You should power off the
Director device if you need to remove or insert a network module.
See these topics for instructions for installing and removing components:
Installing a Power Supply in a QFX3100 Director Device (includes video) on page 589
Removing a Power Supply from a QFX3100 Director Device (includes video) on page 588
587