Replacing Qfx3500 Components - Juniper QFabric QFX3000-G Hardware Documentation

CHAPTER 42

Replacing QFX3500 Components

Installing and Removing QFX3500 Device Hardware Components
Copyright © 2018, Juniper Networks, Inc.
Installing and Removing QFX3500 Device Hardware Components on page 645
Installing a Power Supply in a QFX3500 Device on page 646
Removing a Power Supply from a QFX3500 Device on page 648
Installing a Fan Tray in a QFX3500 Device on page 649
Removing a Fan Tray from a QFX3500 Device on page 651
Installing a Management Board in a QFX3500 Device on page 652
Removing a Management Board from a QFX3500 Device on page 654
The QFX3500 device chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in QFX3500 devices are:
Power supply
Fan tray
Management board
SFP transceiver
SFP+ transceiver
QSFP+ transceiver
All of the QFX3500 device FRUs except the management board are hot-insertable and
hot-removable: you can remove and replace them without powering off the device or
disrupting device functions. You must power off the QFX3500 device before replacing
the management board.
CAUTION: Replace a failed power supply with a blank panel or new power
supply within 1 minute of removal to prevent chassis overheating. Replace a
failed fan tray with a new fan tray within 1 minute of removal to prevent
chassis overheating.
To install a power supply in a QFX3500 device, follow the instructions in
Power Supply in a QFX3500 Device" on page 646. To remove a power supply from a
"Installing a
645