Figure 363: Location Of The Serial Number Id Label On A Qfx3100 Director; Device - Juniper QFabric QFX3000-G Hardware Documentation

Locating Serial Number ID Labels on FRU Components
Related
Documentation
Locating the Serial Number on a QFX3008-I Interconnect Device or Component
Copyright © 2018, Juniper Networks, Inc.
Figure 363: Location of the Serial Number ID Label on a QFX3100 Director Device
The power supplies, fan modules, HDD modules, and network modules are
field-replaceable units (FRUs). For most of these FRUs, you must remove the FRU from
the device chassis to see the FRU serial number ID label.
AC power supply—The serial number ID label is on the right side of the AC power supply.
Fan module—The serial number ID label is on the top of the fan module.
HDD module—The serial number ID label is on the top of the HDD module.
Network module—The serial number ID label is on the left of the network module.
Returning a QFX3100 Director Device or Component for Repair or Replacement on
page 862
If you are returning a device or component to Juniper Networks for repair or replacement,
you must locate the serial number of the device or component. You must provide the
serial number to the Juniper Networks Technical Assistance Center (JTAC) when you
contact them to obtain a Return Materials Authorization (RMA). See
Support to Obtain a Return Materials Authorization for a QFX Series Device or Component"
on page 895.
If the device is operational and you can access the command-line interface (CLI), you
can list serial numbers for the device and for some components with a CLI command. If
you do not have access to the CLI or if the serial number for the component does not
appear in the command output, you can locate the serial number ID label on the physical
device or component.
Chapter 58: Returning Hardware
0265072010000001
Chassis serial number ID label
"Contacting Customer
867