Juniper QFabric QFX3000-G Hardware Documentation page 441

Related
Documentation
Parts Inventory (Packing List) for a QFX3008-I Interconnect Device
Copyright © 2018, Juniper Networks, Inc.
A 5/16-in. open-end or socket wrench to remove the bracket bolts from the shipping
pallet
A box cutter or packing knife to slice open the tape that seals the top of the box
The device ships in a cardboard box that has a two-layer wooden pallet base with foam
cushioning between the layers. The device chassis is bolted to the pallet base. Quick
Start installation instructions and a cardboard accessory box are also included in the
shipping crate.
To unpack the device:
Move the shipping box to a staging area as close to the installation site as possible.
1.
Make sure there is enough space to remove components from the chassis if necessary.
While the chassis is bolted to the pallet, you can use a forklift or pallet jack to move
it.
Remove the cardboard cover, foam padding, and accessory box.
2.
Unpack the accessory box and lay out the contents so that they are ready for use.
3.
Verify that your order includes all appropriate parts. See
4.
List) for a QFX3008-I Interconnect Device" on page
Use a 5/16-in. open-end or socket wrench and a number 2 Phillips screwdriver to
5.
remove the four sets of bracket bolts and screws that secure the chassis to the shipping
pallet. Store the brackets and bolts inside the accessory box.
Save the shipping box, pallet, and packing materials in case you need to move or ship
6.
the device at a later time.
Mounting a QFX3008-I Interconnect Device on a Rack or Cabinet Using a Mechanical
Lift on page 405
The device shipment includes a packing list. Check the parts you receive in the shipping
crate against the items on the packing list. The packing list specifies the part number
and description of each part in your order. The parts shipped depend on the configuration
you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper Networks customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see
https://www.juniper.net/support/requesting-support.html
Chapter 29: Installing a QFX3008-I Interconnect Device
"Parts Inventory (Packing
391.
.
391