Juniper QFabric QFX3000-G Hardware Documentation page 633

Related
Documentation
Removing a QFX5100 Device from a Rack or Cabinet
Copyright © 2018, Juniper Networks, Inc.
DRE-0
Director group
0281022011000011
0281032012000018
Connect the new Node device to each Interconnect device for data plane
8.
interconnection.
Verify the data plane interconnection using the show chassis fabric connectivity
9.
operational mode command from the QFabric default partition CLI. Repeat this
command if necessary until the new device is shown in the output.
From the QFabric director, enter the following configuration mode CLI commands to
10.
remove the previous Node device from the inventory of QFabric system components
and associate the serial number of the new device with the alias of the previous device.
root@fabric# delete fabric aliases node-device old-serial-numberalias-name
root@fabric# set fabric aliases node-device new-serial-numberalias-name
Add the interface configuration of the new Node device and ensure the interfaces are
11.
grouped into a link aggregation group (LAG) for the rerouting of traffic.
Commit the changes using the
12.
the old device to the new device.
Configuring Aliases for the QFabric System
Converting the Device Mode for a QFabric System Component
show chassis fabric connectivity
If you need to relocate an installed QFX5100 device, use the procedure described in this
topic. (The remainder of this topic uses "rack" to mean "rack or cabinet." )
NOTE: When you remove multiple devices from a rack, remove the device in
the top of the rack first and proceed to remove the rest of the devices from
top to bottom.
Before removing a QFX5100 device from a rack:
Ensure that the rack is stable and secured to the building.
Ensure that there is enough space to place the removed QFX5100 device in its new
location and along the path to the new location.
Read "General Safety Guidelines and Warnings" on page
Chapter 39: Removing or Replacing a Device
Connected
Connected
Connected
command, which sends the configuration of
commit
329.
Configured
583