Juniper QFabric QFX3000-G Hardware Documentation page 484

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
Unpacking a QFX5100 Device
434
Registering Products—Mandatory for Validating SLAs
c.
Depending on how you plan to use the QFX5100 device, do one of the following:
4.
If you are using the QFX5100 device as a standalone switch, follow the instructions
in Configuring a QFX5100 Device.
If you are using the QFX5100 device as a Node device in a QFX3000-G QFabric
system, see "QFX3000-G QFabric System Installation Overview" on page 373
information about the steps to install and configure your QFX3000-G QFabric
system.
If you are using the QFX5100 device as a Node device in a QFX3000-M QFabric
system, see QFX3000-M QFabric System Installation Overview for information about
the steps to install and configure your QFX3000-M QFabric system.
If you are using a QFX5100-24Q as an Interconnect device in a QFX3000-M QFabric
system, see Connecting a QFX5100 Node Device to a QFX5100-24Q Interconnect
Device.
If you are using the QFX5100 device in a Virtual Chassis Fabric, see Connecting a
QFX5100 Device in a Virtual Chassis Fabric.
Rack Requirements for a QFX5100 Device on page 232
Cabinet Requirements for a QFX5100 Device on page 240
Clearance Requirements for Airflow and Hardware Maintenance for a QFX5100 Device
on page 248
The QFX5100 switch chassis is a rigid sheet-metal structure that houses the hardware
components. A QFX5100 device is shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
CAUTION: QFX5100 devices are maximally protected inside the shipping
carton. Do not unpack the switch until you are ready to begin installation.
To unpack a QFX5100 device:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Copyright © 2018, Juniper Networks, Inc.
for