Juniper QFabric QFX3000-G Hardware Documentation page 316

QFX3000-G QFabric System Hardware Documentation
Table 96: Cable Specifications for Copper-Based Control Plane Connections for the QFabric System
Port on QFX Series Device
QFX3100 Director device network module ports
QFX3008-I Interconnect device Control Board management
ports (with 1000BASE-T SFP module)
QFX3600-I Interconnect device management (
ports
QFX5100 Interconnect device management
1000BASE-T SFP module)
QFX3600 Node device management (
QFX3500 Node device management (
QFX5100 Node device management
1000BASE-T SFP module)
Related
Documentation
Cable Specifications for QSFP+ and QSFP28 Transceivers
266
Table 96 on page 266 lists the specifications for the cables that connect the QFabric
system control plane.
and
CO
and (with
C0 C1
and ) ports
C0 C1
and ) ports
C0 C1
and (with
C0 C1
Connecting QFX3100 Director Devices to a Copper-Based QFX3000-G QFabric System
Control Plane Network on page 502
Connecting QFX3100 Director Devices to a Copper-Based QFX3000-M QFabric System
Control Plane Network
Connecting a QFX3600-I Interconnect Device to a Copper-Based QFX3000-M QFabric
System Control Plane Network
Connecting a QFX3500 Node Device to a Copper-Based QFX3000-G QFabric System
Control Plane Network on page 515
Connecting a QFX3600 Node Device to a Copper-Based QFX3000-G QFabric System
Control Plane Network on page 512
Connecting a QFX3500 Node Device to a Copper-Based QFX3000-M QFabric System
Control Plane Network
Connecting a QFX3600 Node Device to a Copper-Based QFX3000-M QFabric System
Control Plane Network
Connecting a QFX5100 Node Device to a Copper-Based QFX3000-G QFabric System
Control Plane Network on page 510
Connecting a QFX5100 Node Device to a QFX3600-I Interconnect Device
The 40-Gigabit Ethernet QSFP+ and 100-Gigabit Ethernet QSFP28 transceivers that are
used in QFX Series and EX4600 switches use 12-ribbon multimode fiber crossover cables
with female MPO/UPC connectors. The fiber can be either OM3 or OM4. These cables
are not sold by Juniper Networks.
Cable Specification
Category 5 cable or
equivalent suitable for
1000BASE-T operation
with RJ-45 connectors
)
C1
Maximum Device
Length Receptacle
328 feet RJ-45
(100 meters)
Copyright © 2018, Juniper Networks, Inc.