And Ex4300-48Mp-S Switches; Figure 345: Leds On The Management Port On A 24-Port Ex4300 Switch; Figure 346: Leds On The Management Port On Ex4300-48Mp And; Ex4300-48Mp-S Switches - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
Management Port LEDs on EX4300 Switches

Table 195: Link/Activity LED on the Management Port on an EX4300 Switch

LED Color
Link/Activity Green
772
show chassis lcd
Chassis Component Alarm Conditions on EX4300 Switches
Checking Active Alarms with the J-Web Interface on page 910
Understanding Alarm Types and Severity Levels on EX Series Switches on page 908
The management port, labeled
LEDs that indicate link activity and status of the management port.
shows the location of Management port on a 24-port EX4300 switch. The location of
the LEDs and their behavior are similar for all EX4300 switches except EX4300-48MP

and EX4300-48MP-S switches.

port on EX4300-48MP and EX4300-48MP-S Switches.

Figure 345: LEDs on the Management Port on a 24-Port EX4300 Switch

1— Link/Activity LED
Figure 346: LEDs on the Management Port on EX4300-48MP and EX4300-48MP-S
Switches
1 2
0
RESET
1— Link/Activity LED
Table 195 on page 772 describes the Link/Activity LED.
State and Description
Blinking—The port and the link are active, and there is link activity.
On steadily—The port and the link are active, but there is no link activity.
Off—The port is not active.
, on the rear panel of an EX4300 switch, has two
MGMT
Figure 346 on page 772 shows the location of Management
2— Status LED
2— Status LED
Copyright © 2018, Juniper Networks, Inc.
Figure 345 on page 772