Figure 94: Dc Power Supply For A Qfx3500, Qfx3600, Or Qfx3600-I Device - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
DC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device
132
Front Panel of a QFX3500 Device on page 122
Field-Replaceable Units in a QFX3500 Device on page 119
AC Power Specifications for a QFX3500 Device on page 299
Prevention of Electrostatic Discharge Damage on page 360
The power supplies in a QFX3500, QFX3600, and QFX3600-I device (see
Figure 75 on page 113 and Figure 76 on page
field-replaceable units (FRUs) that you can install in the device without powering off the
device or disrupting the switching function.
The DC power supply in QFX3500, QFX3600, and QFX3600-I devices is 650 W.
NOTE: The V+ terminals are referred to as +RTN and V– terminals are referred
to as –48 V in "DC Power Wiring Sequence Warning" on page 367
Power Electrical Safety Guidelines" on page

Figure 94: DC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device

1— Handle
2—Terminal block
113) are hot-removable and hot-insertable
364.
3— Ejector lever
Copyright © 2018, Juniper Networks, Inc.
and "DC