Table 196: Status Led On The Management Port On An Ex4300 Switch - Juniper QFabric QFX3000-G Hardware Documentation

Table 196: Status LED on the Management Port on an EX4300 Switch

LED Color
Status Green
Related
Documentation
Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on EX4300
Switches
Copyright © 2018, Juniper Networks, Inc.
Table 196 on page 773 describes the Status LED.
State and Description
Indicates the speed. The speed indicators are:
EX4300 switches except EX4300-48MP and EX4300-48MP-S switches:
Off—Link speed is 10 Mbps.
Blinking—Link speed is 100 Mbps.
On steadily—Link speed is 1000 Mbps.
EX4300-48MP and EX4300-48MP-S switches:
Off—Link speed is 10 Mbps or 1000 Mbps.
On steadily—Link speed is 100 Mbps.
Connecting a Device to a Network for Out-of-Band Management
Each 10/100/1000BASE-T network port, SFP network port, SFP+ uplink port, SFP+ uplink
module port, built-in QSFP+ port, and QSFP+ uplink module port on an EX4300 switch
has two LEDs that show the link activity and status of the port.
The following figures in this topic shows the location of those LEDs:
Figure 347 on page 774 shows the location of the LEDs on the 10/100/1000BASE-T and
100/1000/2500/5000/10000BASE-T Ethernet network ports.
Figure 348 on page 774
EX4300 switches except EX4300-48MP and EX4300-48MP-S switches. There are
no SFP network ports on EX4300-48MP and EX4300-48MP-S switches.
Figure 349 on page 774
Figure 350 on page 774
on the SFP+ports on the 4-port SFP+ uplink module on EX4300 switches except
EX4300-48MP and EX4300-48MP-S switches. There is no SFP network port on
EX4300-48MP and EX4300-48MP-S switches.
Figure 351 on page 775 shows the location of the LEDs on the ports on the 4-port 10GbE
uplink module on EX4300-48MP and EX4300-48MP-S switches.
Figure 352 on page 775 shows the location of the LEDs on the QSFP+ uplink module
ports on the QSFP+ uplink module on EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches. There is no QSFP+ uplink module supported on
EX4300-48MP and EX4300-48MP-S switches.
Figure 353 on page 775 shows the location of the LEDs on the SFP+ uplink module ports
on the 8-port SFP+ uplink module on EX4300 switches except EX4300-48MP and
Chapter 54: Viewing EX4300 System Information
shows the location of the LEDs on the SFP network ports on
shows the location of the LEDs on the built-in QSFP+ ports.
shows the location of the LEDs on the SFP+ uplink ports and
773