Juniper QFabric QFX3000-G Hardware Documentation page 936

QFX3000-G QFabric System Hardware Documentation
Packing a QFX5100 Switch for Shipping
886
Before you pack a QFX5100 switch or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See "Prevention of Electrostatic Discharge Damage" on page
Retrieve the original shipping carton and packing materials. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials. See "Contacting Customer Support to Obtain a Return Materials Authorization
for a QFX Series Device or Component" on page
Ensure that you have the following parts and tools available:
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
Packing a QFX5100 Switch for Shipping on page 886
Packing QFX5100 Switch Components for Shipping on page 887
To pack a QFX5100 switch for shipping:
Power down the switch and remove the power cables. See Powering Off a QFX5100
1.
Device.
Remove the cables that connect the QFX5100 switch to all external devices.
2.
Remove all field-replaceable units (FRUs) from the switch.
3.
Have one person support the weight of the switch while another person unscrews
4.
and removes the mounting screws.
Remove the switch from the rack or cabinet (see
5.
QFX5100 Device" on page
Place the switch in the shipping carton.
6.
Place the packing foam on top of and around the switch.
7.
If you are returning accessories or FRUs with the switch, pack them as instructed in
8.
"Packing QFX5100 Switch Components for Shipping" on page
Replace the accessory box on top of the packing foam.
9.
895.
"Chassis Lifting Guidelines for a
339) and place the switch in an antistatic bag.
Copyright © 2018, Juniper Networks, Inc.
360.
887.