Juniper QFabric QFX3000-G Hardware Documentation page 88

QFX3000-G QFabric System Hardware Documentation
Software
Chassis Physical Specifications, Front Panel Display, and Midplane
38
data center using the Junos OS command-line interface (CLI) or Junos Space. See
Understanding the QFabric System Control Plane.
Software on page 38
Chassis Physical Specifications, Front Panel Display, and Midplane on page 38
16-Port QSFP+ Front Card on page 40
Control Board on page 41
Rear Card on page 41
Cooling System on page 41
Power Supplies and Wiring Trays on page 41
QFX Series devices run under the Juniper Networks Junos OS, which provides Layer 2 and
Layer 3 switching, routing, and security services. The same Junos OS code base that runs
on QFX Series devices also runs on all Juniper Networks EX Series switches, and J Series,
M Series, MX Series, and T Series routers.
The QFX3008-I Interconnect device is 21 rack units (21 U) in size (1/2 rack) and designed
to fit in industry-standard 19-inch rack-mount enclosures. See
Figure 21 on page 40, and "Chassis Physical Specifications for a QFX3008-I Interconnect
Device" on page 45.
Figure 20 on page
Copyright © 2018, Juniper Networks, Inc.
39,