Figure 267: Removing A Management Board From A Qfx3500 Device - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

Documentation

To avoid injury, do not touch the fan with your hands or any

tools as you slide the management board out of the chassis—the fan might

still be running.

Grasp the management board handle and pull firmly to slide the management board

halfway out of the chassis.

When the fans stop spinning, slide the management board completely out of the

Place the management board in the antistatic bag or on the antistatic mat placed on

a flat, stable surface.

Figure 267: Removing a Management Board from a QFX3500 Device

Management Board for a QFX3500 Device on page 128

Field-Replaceable Units in a QFX3500 Device on page 119

Front Panel of a QFX3500 Device on page 122

Connecting a Device to a Network for Out-of-Band Management

Connecting a QFX Series Device to a Management Console on page 386

Installing a Management Board in a QFX3500 Device on page 652

Chapter 42: Replacing QFX3500 Components

Table of Contents