Figure 351: Leds On The Ports On The 4-Port 10Gbe Uplink Module On Ex4300-48Mp And Ex4300-48Mp-S Switches; Figure 352: Leds On The Qsfp+ Uplink Module Ports On Ex4300 Switches Except Ex4300-48Mp And Ex4300-48Mp-S Switches; Figure 353: Leds On The Sfp+ Ports On The 8-Port Sfp+ Uplink Module On; Switches - Juniper QFabric QFX3000-G Hardware Documentation

Copyright © 2018, Juniper Networks, Inc.
Figure 351: LEDs on the Ports on the 4-Port 10GbE Uplink Module on EX4300-48MP and
EX4300-48MP-S Switches
1 2 3
0 1
4
1— Captive screws of the uplink module
2— Link activity LED of the uplink module port
Figure 352: LEDs on the QSFP+ Uplink Module Ports on EX4300 Switches Except
EX4300-48MP and EX4300-48MP-S Switches
1— Status LED of the uplink module
2—Link activity LED of the uplink module port
Figure 353: LEDs on the SFP+ Ports on the 8-Port SFP+ Uplink Module on EX4300
Switches Except EX4300-48MP and EX4300-48MP-S Switches
1— Status LED of the uplink module
2— Link activity LED of the lower port
3—Link activity LED of the upper port
The Table 197 on page 776 describes the link activity LED on 10/100/1000BASE-T network
ports, SFP network ports, SFP+ uplink ports, SFP+ uplink module ports, built-in QSFP+
ports, and QSFP+ uplink module ports.
Chapter 54: Viewing EX4300 System Information
1
2 3
3— Status LED of the uplink module port
4— Handle of the uplink module
3— Status LED of the uplink module port
4— Status LED the lower port
5— Status LED the upper port
775