Table 249: Summary Of Key Alarm Output Fields - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Checking Active Alarms with the J-Web Interface
Purpose
Action
Meaning

Table 249: Summary of Key Alarm Output Fields

Field Values
Type Category of the alarm:
Severity Alarm severity—either major (red) or minor (yellow).
Description Brief synopsis of the alarm.
Time Date and time when the failure was detected.
Related
Documentation
910
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches
including alarm type, alarm severity, and a brief description for each active alarm on the
switching platform.
To view the active alarms:
Select >
Monitor Events and Alarms
1.
Select an alarm filter based on alarm type, severity, description, and date range.
2.
Click .
Go
3.
All the alarms matching the filter are displayed.
NOTE: When the switch is reset, the active alarms are displayed.
Table 249 on page 910 lists the alarm output fields.
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such as
one related to temperature).
System—Indicates an alarm condition in the system.
Monitoring System Log Messages on page 911
Dashboard for EX Series Switches on page 780
Understanding Alarm Types and Severity Levels on EX Series Switches on page 908
> in the J-Web interface.
View Alarms
Copyright © 2018, Juniper Networks, Inc.