Juniper QFabric QFX3000-G Hardware Documentation page 582

QFX3000-G QFabric System Hardware Documentation
532
Connect one end of the second fiber optic cable to the SFP optical transceiver in
c.
the second management port (labeled
Connect the other end of that cable to port
d.
Connect one end of the third fiber optic cable to the SFP optical transceiver in the
e.
first management port labeled (labeled
CB 1 ).
Connect the other end of that cable to port
f.
Connect one end of the fourth fiber optic cable to the SFP optical transceiver in
g.
the second management port (labeled
Connect the other end of that cable to port
h.
(Optional) Connect the third QFX3008-I Interconnect device.
3.
Connect one end of the first fiber optic cable to the SFP optical transceiver in the
a.
first management port labeled (labeled
).
0
Connect the other end of that cable to port
b.
Connect one end of the second fiber optic cable to the SFP optical transceiver in
c.
the second management port (labeled
Connect the other end of that cable to port
d.
Connect one end of the third fiber optic cable to the SFP optical transceiver in the
e.
first management port labeled (labeled
).
CB 1
Connect the other end of that cable to port
f.
Connect one end of the fourth fiber optic cable to the SFP optical transceiver in
g.
the second management port (labeled
Connect the other end of that cable to port
h.
Connect the fourth QFX3008-I Interconnect device.
4.
) on .
1 CB0
on the second Virtual Chassis.
ge-2/0/19
) on the second Control Board (labeled
0
ge-3/0/19 on the first Virtual Chassis.
1 ) on CB1 .
ge-3/0/19 on the second Virtual Chassis.
) on the first Control Board (labeled
0
on the first Virtual Chassis.
ge-0/0/18
1 ) on CB0 .
ge-0/0/18 on the second Virtual Chassis.
0 ) on the second Control Board (labeled
on the first Virtual Chassis.
ge-1/0/18
) on .
1 CB1
on the second Virtual Chassis.
ge-1/0/18
Copyright © 2018, Juniper Networks, Inc.
CB