Juniper QFabric QFX3000-G Hardware Documentation page 259

Table 63: Site Preparation Checklist
Item or Task
Environment
Verify that environmental factors such as temperature and
humidity do not exceed QFX3100 Director device tolerances.
Power
Measure the distance between external power sources and
QFX3100 Director device installation site.
Calculate power consumption and requirements.
Hardware Configuration
Choose the number and types of QFX3100 Director devices
you want to install.
Rack or Cabinet
Verify that your rack or cabinet meets the minimum
requirements for the installation of the QFX3100 Director
device.
Plan the rack or cabinet location, including required space
clearances.
Secure the rack or cabinet to the floor and building structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed based on your
planned configuration.
Review the maximum distance allowed for each cable.
Choose the length of cable based on the distance between
the hardware components being connected.
Plan cable routing and management.
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 329
General Site Guidelines on page 217
Installing and Connecting a QFX3100 Director Device on page 377
Mounting a QFX3100 Director Device on Four Posts in a Rack or Cabinet on page 381
Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet on page 380
For More Information
"Environmental Requirements and
Specifications for a QFX3100 Director
Device" on page 218
"QFX3100 Director Device Overview"
on page 25
"Rack Requirements for a QFX3100
Director Device" on page 230
"Clearance Requirements for Airflow
and Hardware Maintenance for a
QFX3100 Director Device" on page 245
Chapter 9: Site Preparation
Performed
By Date
209