Juniper QFabric QFX3000-G Hardware Documentation page 906

QFX3000-G QFabric System Hardware Documentation
856
Use the arrow keys to select the default adapte,r and press Enter to open the Adapter
3.
Properties page.
Use the arrow keys to highlight
4.
Type Options page.
Select
5. Create IM Volume
new volume. The new volume information appears on the Create New Array page.
The following example shows that both HDD modules are visible but not part of the
RAID.
LSI Corp Config Utility
*
* Create New Array -- SAS1068E
*
* Array Type:
*
* Array Size(MB):
*
*
*
* Slot Device Identifier
*
* Num
*
* 0 ATA WDC WD2003FYYS-01D01
**
* 1 ATA WDC WD2003FYYS-01D01
**
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
**
* Esc = Exit Menu
*
* Space/+/- = Select disk for array or hot spare
RAID Properties , and press Enter to open the New Array
, and press Enter to delete the existing volume and create a
v6.30.00.00 (2009.11.12)
IM
---------
RAID Hot
Disk Spr
[No] [No]
[No] [No]
F1/Shift+1 = Help
Drive Pred Size
Status Fail (MB)
--------- --- 1907729
--------- --- 1907729
C = Create array
Copyright © 2018, Juniper Networks, Inc.