Juniper QFabric QFX3000-G Hardware Documentation page 594

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
544
CAUTION: Do not bend fiber-optic cables beyond their minimum bend
radius. An arc smaller than a few inches in diameter can damage the cables
and cause problems that are difficult to diagnose.
Do not let fiber-optic cables hang free from the connector. Do not allow
fastened loops of cables to dangle, which stresses the cables at the
fastening point.
Connecting a QFX3500 Node Device to a QFX3008-I Interconnect Device on page 548
Connecting a QFX3600 Node Device to a Fiber-Based QFX3000-G QFabric System
Control Plane Network on page 537
Copyright © 2018, Juniper Networks, Inc.