Juniper QFabric QFX3000-G Hardware Documentation page 958

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

QFX3000-G QFabric System Hardware Documentation

Interface Alarm Messages

Documentation

Understanding Alarm Types and Severity Levels on EX Series Switches

Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different

Interface Types

Interface alarms are alarms that you configure to alert you when an interface is down.

To configure an interface link-down condition to trigger a red or yellow alarm, or to

configure the link-down condition to be ignored, use the

] hierarchy level. You can specify the

interface type.

management-ethernet

Fibre Channel alarms are only valid on QFX3500 devices.

When red alarms or major alarms are issued on QFX5100 and EX4600

switches, the alarm LED glows amber instead of red.

By default, major alarms are configured for interface link-down conditions on the control

plane and management network interfaces in a QFabric system. The link-down alarms

indicate that connectivity to the control plane network is down. You can configure these

alarms to be ignored using the

If you configure a yellow alarm on the QFX3008-I Interconnect device,

it will be handled as a red alarm.

Understanding Alarms on page 897

This topic applies only to the J-Web Application package.

Alarms alert you to conditions that might prevent normal operation of the switch. Before

monitoring alarms on a Juniper Networks EX Series Ethernet switch, become familiar

with the terms defined in

Table 248 on page

fibre-channel

statement at the [

edit chassis

statement at the [

] hierarchy level.

Chapters

Table of Contents