Juniper QFabric QFX3000-G Hardware Documentation page 454

QFX3000-G QFabric System Hardware Documentation
Installing the Large Mounting Shelf for QFX3008-I Interconnect Device Two-Post Rack Mounting
Related
Documentation
404
Before you begin, ensure that you have the following parts and tools available to install
the small mounting shelf:
A Phillips (+) screwdriver, number 2 or 3, depending on the size of your rack mounting
screws
Six mounting screws appropriate for your rack to attach the small mounting shelf to
the rack
On the front of each rack rail, partially insert a mounting screw into the lowest hole
1.
specified in Table 137 on page 402
Install the small shelf on the rack. Rest the bottom slot of each ear on a mounting
2.
screw. The small shelf installs on the front of the rails, extending away from the rack.
The bottom of the small shelf should align with the bottom of the large shelf
Partially insert screws into the open holes in the ears of the small shelf. Tighten all
3.
the screws.
To mount the chassis on a two-post rack, you must first install the mounting shelves on
the rack.
Before you begin, ensure that you have the following parts and tools available to install
the large mounting shelf:
A Phillips (+) screwdriver, number 2 or 3, depending on the size of your rack mounting
screws
22 mounting screws appropriate for your rack to attach the large mounting shelf to
the rack
To install the large mounting shelf and spacer bars:
On the rear of each rack rail, partially insert a mounting screw into the lowest hole
1.
specified in Table 137 on page 402
Install the large shelf on the rack. Rest the bottom slot of each ear on a mounting
2.
screw.
Partially insert screws into the open holes in the ears of the large shelf. Tighten all the
3.
screws.
Understanding Interconnect Devices on page 14
QFX3008-I Interconnect Device Overview on page 37
Field-Replaceable Units in a QFX3008-I Interconnect Device on page 42
for the small shelf.
for the large shelf.
Copyright © 2018, Juniper Networks, Inc.