Juniper QFabric QFX3000-G Hardware Documentation page 654

QFX3000-G QFabric System Hardware Documentation
Installing and Removing QFX3008-I Interconnect Device Hardware Components
604
The field-replaceable units (FRUs) in a QFX3008-I Interconnect device are:
Control Boards
Fan trays
Air filters
16-port QSFP+ front cards
Rear cards
QSFP+ and SFP+ transceivers
Power supplies
Wiring trays
The FRUs in a QFX3008-I Interconnect device are hot-insertable and hot-removable:
you can remove and replace these components while the device is functioning without
turning off power to the device or disrupting the device function. However, we recommend
that you take the 16-port QSFP+ front cards and the rear cards offline and power them
off before you remove them. You must take Control Boards offline before you remove
them. See "Field-Replaceable Units in a QFX3008-I Interconnect Device" on page 42
details.
To install a Control Board in a QFX3008-I Interconnect device, follow the instructions in
"Installing a Control Board in a QFX3008-I Interconnect Device" on page
a Control Board from a QFX3008-I Interconnect device, follow the instructions in
"Removing a Control Board from a QFX3008-I Interconnect Device" on page
To install a fan tray in a QFX3008-I Interconnect device, follow the instructions in
"Installing a Bottom Fan Tray and Front Panel Display in a QFX3008-I Interconnect
Device" on page 613, "Installing a Side Fan Tray in a QFX3008-I Interconnect Device" on
page 616, and "Installing a Top Fan Tray in a QFX3008-I Interconnect Device" on page
To remove a fan tray from a QFX3008-I Interconnect device, follow the instructions in
"Removing a Bottom Fan Tray and Front Panel Display from a QFX3008-I Interconnect
Device" on page 611, "Removing a Side Fan Tray from a QFX3008-I Interconnect Device"
on page 614, and "Removing a Top Fan Tray from a QFX3008-I Interconnect Device" on
page 618.
To install an air filter in a QFX3008-I Interconnect device, follow the instructions in
"Installing a Bottom Air Filter in a QFX3008-I Interconnect Device" on page 622
"Installing a Side Air Filter in a QFX3008-I Interconnect Device" on page
an air filter from a QFX3008-I Interconnect device, follow the instructions in
a Bottom Air Filter from a QFX3008-I Interconnect Device" on page 620
a Side Air Filter from a QFX3008-I Interconnect Device" on page
To install a 16-port QSFP+ front card in a QFX3008-I Interconnect device, follow the
instructions in "Installing a 16-Port QSFP+ Front Card in a QFX3008-I Interconnect Device"
on page 636. To remove a 16-port QSFP+ front card from a QFX3008-I Interconnect device,
631. To remove
629.
and
625. To remove
"Removing
and "Removing
623.
Copyright © 2018, Juniper Networks, Inc.
for
619.