Figure 259: Installing 16-Port Qsfp+ Front Card In A Qfx3008-I Interconnect; Device - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
Taking the Rear Card Offline in a QFX3008-I Interconnect Device
638
Figure 259: Installing 16-Port QSFP+ Front Card in a QFX3008-I Interconnect Device
Ejector
lever
16-Port QSFP+ Front Cards in a QFX3008-I Interconnect Device on page 52
16-Port QSFP+ Front Card LEDs on a QFX3008-I Interconnect Device on page 731
To prevent data loss, we recommend that you take a rear card offline and power it off
before removing it from a QFX3008-I Interconnect device.
The rear cards provide switching functionality for a QFX3000-G QFabric system. We
recommend that you install all eight rear cards in each QFX3008-I Interconnect device
for normal device operation. When you take a rear card offline, the switching capacity of
the QFX3000-G QFabric system will be reduced until the rear card is replaced.
To take the rear card offline in a QFX3008-I Interconnect device:
Log into the QFabric default partion on the Director device and start the CLI.
1.
[root@dg0] # cli
Copyright © 2018, Juniper Networks, Inc.