Qfx3000-M Qfabric System Features; Understanding Qfx3000-G Qfabric System Hardware Configurations - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:
Table of Contents

Advertisement

QFX3000-G QFabric System Hardware Documentation

QFX3000-M QFabric System Features

Related
Documentation

Understanding QFX3000-G QFabric System Hardware Configurations

10
A QFX3000-M QFabric system provides the following key features:
Support for up to 32 Node devices and 4 QFX5100-24Q Interconnect devices or 16
Node device and 4 QFX3600-I Interconnect devices.
NOTE:
You may not mix QFX5100-24Q Interconnect devices with
QFX3600-I Interconnect devices on the same QFX3000-M QFabric system.
Low port-to-port latencies that scale as the system size grows from 48 to 768
10-Gigabit Ethernet ports.
Understanding QFabric System Terminology
Understanding the QFabric System Software Architecture
Understanding the Director Group on page 12
Understanding Routing Engines in the QFabric System on page 13
Understanding Interconnect Devices on page 14
Understanding Node Devices on page 18
Understanding Node Groups on page 22
Understanding Partitions
The QFX3000-G QFabric system is made up of multiple hardware components:
EX4200 switches—Eight EX4200 switches are required for a QFX3000-G QFabric
system. The EX4200 switches are divided into two Virtual Chassis configurations with
four switches each.
Up to 192 Gigabit Ethernet RJ-45 ports on each Virtual Chassis provide control plane
and management network interconnection.
Four 10-Gigabit Ethernet uplink ports on each Virtual Chassis interconnect the two
Virtual Chassis configurations.
QFX3100 Director devices—Two QFX3100 Director devices are required for a
QFX3000-G QFabric system. Together, the two Director devices are called a Director
group.
Six Gigabit Ethernet RJ-45 or six small-form factor pluggable (SFP) ports on each
QFX3100 Director device provide connection to the control plane and management
network through the Virtual Chassis.
Two Gigabit Ethernet RJ-45 or two SFP ports on each QFX3100 Director device
interconnect two Director devices in a Director group.
Copyright © 2018, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents