Installing A Qfx3008-I Interconnect Device - Juniper QFabric QFX3000-G Hardware Documentation

CHAPTER 29
Installing a QFX3008-I Interconnect
Device
Installing and Connecting a QFX3008-I Interconnect Device
Copyright © 2018, Juniper Networks, Inc.
Installing and Connecting a QFX3008-I Interconnect Device on page 389
Unpacking a QFX3008-I Interconnect Device on page 390
Parts Inventory (Packing List) for a QFX3008-I Interconnect Device on page 391
Installing QFX3008-I Interconnect Device Mounting Hardware on Four-Post Racks or
Cabinets on page 394
Installing QFX3008-I Interconnect Device Mounting Hardware on Two-Post
Racks on page 401
Mounting a QFX3008-I Interconnect Device on a Rack or Cabinet Using a Mechanical
Lift on page 405
Connecting Earth Ground to a QFX3008-I Interconnect Device on page 409
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays on page 411
Preparing Delta and Wye Three-Phase Power Cords on page 413
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Delta
Wiring Trays on page 418
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Wye
Wiring Trays on page 422
Powering On a QFX3008-I Interconnect Device on page 425
Connecting a QFX Series Device to a Management Console on page 426
Before you begin, ensure that the installation site meets the requirements described in
"Site Preparation Checklist for a QFX3008-I Interconnect Device" on page
To install and connect a QFX3008-I Interconnect device:
Follow the instructions in
1.
Install the mounting hardware on your four-post or two-post rack or cabinet by
2.
following the instructions in
"Unpacking a QFX3008-I Interconnect Device" on page
"Installing QFX3008-I Interconnect Device Mounting
210.
390.
389