Juniper QFabric QFX3000-G Hardware Documentation page 504

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
Unpacking a QFX3600 or QFX3600-I Device
454
If you are using the QFX3600 device as a standalone switch, follow the instructions
in Configuring a QFX3600 Device as a Standalone Switch.
If you are using the QFX3600 device as a Node device in a QFX3000-G QFabric
system, see "QFX3000-G QFabric System Installation Overview" on page 373
information about the steps to install and configure your QFX3000-G QFabric
system.
If you are using the QFX3600 device as a Node device in a QFX3000-M QFabric
system, see QFX3000-M QFabric System Installation Overview for information about
the steps to install and configure your QFX3000-M QFabric system.
If you are using the QFX3600-I device as an Interconnect device in a QFX3000-M
QFabric system, see QFX3000-M QFabric System Installation Overview for
information about the steps to install and configure your QFX3000-M QFabric
system.
Rack Requirements for a QFX3600 or QFX3600-I Device on page 233
Cabinet Requirements for a QFX3600 or QFX3600-I Device on page 241
Clearance Requirements for Airflow and Hardware Maintenance for a QFX3600 or
QFX3600-I Device on page 249
The QFX3600 or QFX3600-I device chassis is a rigid sheet-metal structure that houses
the hardware components. QFX3600 and QFX3600-I devices are shipped in a cardboard
carton, secured with foam packing material. The carton also contains an accessory box
and quick start instructions.
CAUTION: QFX3600 and QFX3600-I devices are maximally protected inside
the shipping carton. Do not unpack the device until you are ready to begin
installation.
To unpack a QFX3600 or QFX3600-I device:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box and verify the contents against the inventory included in
4.
the box. Table 139 on page 455
QFX3600 or QFX3600-I device.
lists the inventory of components supplied with a
Copyright © 2018, Juniper Networks, Inc.
for