Figure 330: Leds On The Management Ports On A Qfx3600 Or Qfx3600-I; Device; Table 180: Management Port Leds In A Qfx3600 Or Qfx3600-I Device - Juniper QFabric QFX3000-G Hardware Documentation

Table 180: Management Port LEDs in a QFX3600 or QFX3600-I Device

LED Color
Link speed Unlit
Green
Amber
Activity Unlit
Green
Related
Documentation
Access Port and Uplink Port LEDs on a QFX3600 or QFX3600-I Device
Copyright © 2018, Juniper Networks, Inc.
Figure 330: LEDs on the Management Ports on a QFX3600 or QFX3600-I Device
Link speed
LED
Table 180 on page 751 describes the management port LEDs.
State
Off
On steadily
On steadily
Off
Flickering
Front Panel of a QFX3600 Device on page 104
Front Panel of a QFX3600-I Interconnect Device
Connecting a QFX3600 Device to a Network for Out-of-Band Management
Each access port and uplink port in a QFX3600 device has two LEDs (see
Figure 331 on page 752).
Chapter 52: Viewing QFX3600 System Information
Activity
LED
Description
The port is not active.
1-Gbps link is established.
10/100-Mbps link is established.
NOTE: The SFP management ports (
support 10-Mbps or 100-Mbps speeds.
There is no activity on the link.
There is activity on the link.
and ) do not
C0S C1S
751