Honda ACCORD HYBRID 2005 Service Manual page 359

53. Check for continuity between body g r o u n d and the
appropriate PCM connector terminal (see table).
PCM C O N N E C T O R A (31P)
INJ5 (BLK/RED)
1 2 3 4 5 6 | 7 8 | 9
10 11 12 13 1.4 15 16 17 18 19 20 21
/
23 24
25 26 27 28 29 30 31
INJ1
INJ2
(RED)
INJ6 I INJ4 I I INJ3
(WHT/BLU) Y E L ) l l ( B L U )
(P) (P)(0) (p)(0)
W i r e side of female t e r m i n a l s
PROBLEM DTC PCM WIRE
CYLINDER TERMINAL COLOR
No. 1 P0301 A21 BRN
No. 2 P0302 A31
RED
No. 3 P0303 A30 BLU
No. 4 P0304 A29 YEL
No. 5 P0305 A28
BLK/RED
No. 6 P0306 A27 WHT/BLU
Is there continuity?
Y E S — G o t o step 54.
NO—Repair open in the w i r e between the PCM and
the injector, then go to step 55.
54. Measure resistance between injector 2P connector
terminals No. 1 and No. 2.
INJECTOR 2P C O N N E C T O R
INJ
IGP
Terminal side of male t e r m i n a l s
Is there 10- 13 Q?
Y E S — G o t o step 64.
NO—Replace the injector (see page 11-211), then
go to step 55.
(cont'd)
11-119