The displayed port configuration information includes the following:
•
Port — The port number.
•
Port Type — The port designated IEEE shorthand identifier. For example 1000Base-T refers
to 1000 Mbps baseband signaling.
•
Duplex — Displays the port Duplex status.
•
Speed — Refers to the port speed.
•
Neg — Describes the Auto-negotiation status.
•
Flow Control — Displays the Flow Control status.
•
Admin State — Displays whether the port is enabled or disabled.
•
Back Pressure — Displays the Back Pressure status.
MDIX Mode — Displays the Auto-crossover status.
•
show interfaces status
The show interfaces status User EXEC mode command displays the status for all interfaces.
Syntax
show interfaces status [ethernet interface| port-channel port-channel-number]
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Ethernet Configuration Commands
109