Table of Contents
Advertisement
----
--------------------------------- -----------
Forbidden VLANS:
VLAN
Name
----
---------------------------------
Port Gi1/0/1 Enabled
State: Disabled
Port id: 128.1
Port Fast:
No (Configured: no )
Designated bridge Priority: 32768
Designated port id: 0.0
CST Regional Root: 80:00:14:18:77:15:23:68 CST Port Cost: 0
BPDUs: Sent: 0, Received: 0
show interfaces status
Use the show interfaces status command to display the status for all
configured interfaces.
Syntax
show interfaces status
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Port channels are only displayed if configured. Use the
channel
command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
the
show interfaces status
The link state indicates the physical connectivity state of the link. It is
possible that the link is connected physically yet frames are not able to pass
over the link. Possible causes of this condition are speed or duplex mismatch.
The displayed port status information includes the following:
command.
Layer 2 Switching Commands
Role: Disabled
Port Cost: 0
Root Protection: No
Address: 1418.7715.2368
Designated path cost: 0
show interfaces port-
406
Advertisement
Table of Contents
