Drop-Threshold - Dell PowerConnect J-EX4200-24T Software Manual

drop-threshold

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
drop-threshold number;
[edit vlans vlan-name dot1q-tunneling layer2-protocol-tunneling all | protocol-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the maximum number of Layer 2 PDUs of the specified protocol that can be
received per second on the interfaces in a specified VLAN before the switch begins
dropping the Layer 2 PDUs. The drop threshold value must be less than or equal to the
shutdown threshold value.
NOTE: If the drop threshold value is greater than the shutdown threshold
value and you try to commit the configuration, the commit will fail.
You can specify a drop threshold value without specifying a shutdown threshold value.
No drop threshold is specified.
—Maximum number of Layer 2 PDUs of the specified protocol that can be received
number
per second on the interfaces in a specified VLAN before the switch begins dropping
the Layer 2 PDUs.
Range: 1 through 1000
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
shutdown-threshold on page 1220
Example: Configuring Layer 2 Protocol Tunneling on J-EX Series Switches on page 1126
Configuring Layer 2 Protocol Tunneling on J-EX Series Switches (CLI Procedure) on
page 1150
Chapter 62: Configuration Statements for Bridging and VLANs
1187