Power Inline Legacy Support Disable; Power Inline Usage-Threshold - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm

power inline legacy support disable

To disable the legacy PDs support, use the power inline legacy support disable
Global Configuration mode command. To enable the legacy support, use the
no form of this command.
This command is only supported on devices that support PoE.
Syntax
power inline legacy support disable
no power inline legacy support disable
Parameters
N/A.
Default Configuration
Legacy support is enabled.
Command Mode
Global Configuration mode
Example
The following example disables legacy PD support.
Console(config)# power legacy support disable

power inline usage-threshold

Use the power inline usage-threshold Global Configuration mode command to
configure the threshold for initiating inline power usage alarms. Use the no form
of this command to restore the default configuration.
This command is only supported on devices that support PoE.
Syntax
power inline usage-threshold percent
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
368
CLI