Info-Center Channel Name - H3C s3600 series Command Manual

size buffersize: Specifies the size of the trap buffer (number of messages the buffer holds) you want to
display. The buffersize argument ranges from 1 to 1,024 and defaults to 256.
Description
Use the display trapbuffer command to display the status of the trap buffer and the records in the trap
buffer.
Absence of the size buffersize argument indicates that all trap information is displayed.
Examples
# Display the status of the trap buffer and the records in the trap buffer.
<Sysname> display trapbuffer
Trapping Buffer Configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 19
#Apr 1 23:55:35:859 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227762, ifAdminStatus is 1, ifOperStatus
is 1
#Apr 1 23:55:36:059 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227794, ifAdminStatus is 1, ifOperStatus
is 1
......
<Omitted>

info-center channel name

Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameters
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.
channel-name: Channel name, up to 30 characters in length. The name must start with an English letter,
containing no special character but numbers and English letters only.
Description
Use the info-center channel name command to name the channel whose number is channel-number
as channel-name.
1-6