Show Multiauth Port; Set Multiauth Port - Enterasys C3G124-24 Configuration Manual

Mode
Switch command, read-write.
Example
This example shows how to clear the multiple authentication precedence:
C3(rw)->clear multiauth precedence

show multiauth port

Use this command to display multiple authentication properties for one or more ports.
Syntax
show multiauth port [port-string]
Parameters
port-string
Defaults
If port-string is not specified, multiple authentication information will be displayed for all ports.
Mode
Switch command, read-only.
Example
This example shows how to display multiple authentication information for ports
number of "Max users" shown by this command varies depending on the platform.
C3(rw)->show multiauth port ge.3.1-4
Port
------------ ------------ ---------- ---------- ----------
ge.3.1
ge.3.2
ge.3.3
ge.3.4

set multiauth port

Use this command to set multiple authentication properties for one or more ports.
Syntax
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
(Optional) Displays multiple authentication information for specific port(s).
Mode Max
users
auth-opt n
auth-opt n
auth-opt n
auth-opt n
Allowed Current
users users
1 0
1 0
1 0
1 0
Enterasys C3 Configuration Guide 32-45
show multiauth port
.3.1-4. The
ge