Clear Multiauth Precedence; Show Multiauth Port - Enterasys SecureStack C2 Configuration Manual

clear multiauth precedence

clear multiauth precedence
Use this command to clear the system's multiple authentication administrative precedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the multiple authentication precedence:
C2(rw)->clear multiauth precedence

show multiauth port

Use this command to display multiple authentication properties for one or more ports.
Syntax
show multiauth port [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, multiple authentication information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display multiple authentication information for ports
C2(rw)->show multiauth port ge.3.1-4
Port
------------ ------------ ---------- ---------- ----------
ge.3.1
ge.3.2
ge.3.3
ge.3.4
18-34 Security Configuration
(Optional) Displays multiple authentication information for specific port(s).
Mode Max
users
auth-opt 2
auth-opt 2
auth-opt 2
auth-opt 2
Allowed Current
users users
8 0
8 0
8 0
8 0
.3.1‐4:
ge