Show Macauthentication - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring MAC Authentication
14.3.7.1

show macauthentication

Use this command to display MAC authentication information for one or more ports.
show macauthentication [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC authentication information will be displayed
for all ports.
Examples
This example shows how to display MAC authentication information for ge.1.1 through 8:
Router3(su)->show macauthentication ge.1.1-8
MAC authentication:
MAC user password:
Port username significant bits
Port Port
State
-------- -------- ---------- ---------- -------- ---------
ge.1.1 disabled
ge.1.2 disabled
ge.1.3 disabled
ge.1.4 disabled
ge.1.5 disabled
ge.1.6 disabled
ge.1.7 disabled
ge.1.8 disabled
Table 14-4 provides an explanation of the command output.
14-80 Matrix NSA Series Configuration Guide
(Optional) Displays MAC authentication information for
specific port(s). For a detailed description of possible
port-string values, refer to
- disabled
- NOPASSWORD
- 48
Quiet Reauth
Period Period
0 3600
0 3600
0 3600
0 3600
0 3600
0 3600
0 3600
0 3600
Section
Auth Auth
Allowed Allocated
256 256
256 256
256 256
256 256
256 256
256 256
256 256
256 256
4.1.1.
Reauthentications
---------------
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled