Clear Snmp Notify; Show Snmp Notifyfilter - Enterasys SecureStack C2 Configuration Manual

clear snmp notify

clear snmp notify
Use this command to clear an SNMP notify configuration.
Syntax
clear snmp notify notify
Parameters
notify
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the SNMP notify configuration for "hello":
C2(su)->clear snmp notify hello

show snmp notifyfilter

Use this command to display SNMP notify filter information, identifying which profiles will not
receive SNMP notifications.
Syntax
show snmp notifyfilter [profile] [subtree oid-or-mibobject] [volatile |
nonvolatile | read-only]
Parameters
profile
subtree oid‐or‐
mibobject
volatile |
nonvolatile | read‐
only
Defaults
If no parameters are specified, all notify filter information will be displayed.
Mode
Switch command, read‐only.
Usage
See "About SNMP Notify Filters" on page 6‐28 for more information about notify filters.
6-32 SNMP Configuration
Specifies an SNMP notify name to clear.
(Optional) Displays a specific notify filter.
(Optional) Displays a notify filter within a specific subtree.
(Optional) Displays notify filter entries of a specific storage type.