Show Processes Cpu - Dell S6000 Reference Manual

Usage The output for show memory displays the memory usage of LP part (sysdlp) of the
Information
system. The sysdlp is an aggregate task that handles all the tasks running on the S-
Series' CPU.
Example
Dell#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b)
268435456 4010354 264425102 264375410 264425102
Example
Dell#show memory stack 0
(S4820T)
Statistics On Unit 0 Processor
===========================
Total(b)
2147483648 4322398 2143161250 2142548382 2143161250
Dell#

show processes cpu

Display CPU usage information based on processes running.
S6000
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit
id | summary | [stack-unit id]]
Parameters
management-
unit 1-99
[details]
stack-unit id
summary
Command
•
Modes
•
122
Used(b) Free(b)
Used(b) Free(b)
(OPTIONAL) Display processes running in the control
processor. The 1-99 variable sets the number of tasks to
display in order of the highest CPU usage in the past five (5)
seconds. Add the keyword details to display all running
processes (except sysdlp). Refer to Example (management-
unit).
(OPTIONAL) Enter the keyword stack-unit then the stack
member ID.
As an option of the show processes cpu command, this
option displays CPU usage for the designated stack member.
Or, as an option of the command, this option limits the output
of memory statistics to the designated stack member. The
unit ID range for the S4810 is from 0 to 11.
Refer to Example (stack-unit).
(OPTIONAL) Enter the keywordsummary to view CPU
utilization of processes related to stack-unit processing.
EXEC
EXEC Privilege
Lowest(b) Largest(b)
Lowest(b) Largest(b)
Control and Monitoring