Check Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

check policy

check policy
check policy <policy-name>
Description
Checks the syntax of the specified policy.
Syntax Description
policy-name Specifies the policy to check.
Default
N/A.
Usage Guidelines
Use this command to check the policy syntax before applying it. If any errors are found, the line
number and a description of the syntax error are displayed. A policy that contains syntax errors will not
be applied.
Example
The following example checks the syntax of the policy zone5:
check policy zone5
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 411