Configuring A Remote Maintenance Endpoint Action Profile; Configuring A Connectivity Fault Management Action Profile; Configuring The Action Of A Cfm Action Profile; Configuring The Default Actions Of A Cfm Action Profile - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
Configuring a Remote Maintenance Endpoint
You can configure a remote MEP from which CCM messages are expected. If
autodiscovery is not enabled, the remote MEP must be configured under the
statement. If the remote MEP is not configured under the
from the remote MEP are treated as errors.
To configure the remote MEP, include the
oam ethernet connectivity-fault-management maintenance-domain domain-name
maintenance-association ma-name mep mep-id]

Configuring a Remote Maintenance Endpoint Action Profile

You can specify the name of the action profile to use for the remote MEP.
To configure the action profile, include the
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name mep mep-id remote-mep mep-id]
hierarchy level. The profile must already be defined at the
connectivity-fault-management]

Configuring a Connectivity Fault Management Action Profile

You can configure an action profile and specify the action to be taken when any of
the configured events occur. Alternately, you can configure an action profile and
specify default actions when connectivity to a remote MEP fails.
To configure the action profile name, include the
protocols oam ethernet connectivity-fault-management]

Configuring the Action of a CFM Action Profile

You can configure the action to be taken when any of the configured events occur.
712
Configuring a Connectivity Fault Management Action Profile
maintenance-association ma6 {
mep 200 {
interface ge-5/0/0.0;
direction down;
lowest-priority-defect mac-rem-err-xcon;
}
}
}
}
}
}
Configuring the Action of a CFM Action Profile on page 712
Configuring the Default Actions of a CFM Action Profile on page 713
Configuring a CFM Action Profile Event on page 714
statement at the
remote-mep
hierarchy level.
action-profile profile-name
hierarchy level.
action-profile
hierarchy level.
mep
mep statement, the CCMs
[edit protocols
statement at the
[edit protocols oam ethernet
statement at the [edit